It can keep you from accidentally bending or breaking an expensive acrylic. Get help - Having a second person handy when you are replacing the lamps is a good idea. Use some caution, as reflectors often have sharp edges. While you should never use glass cleaner on your acrylic, it is fine to use on the new lamps and the reflectors. Cleaning the new lamps also a good idea as they can get a thin powder coating on them from the manufacturing process. UV is incredibly easy to block, and cleaning dusty reflectors is a cheap, easy way to boost performance. The manufacturer recommends you do this every 1-2 years for home tanning beds.Ĭlean your reflectors, the new lamps, and the cooling fans - Since you are already taking your bed apart, clean everything inside for maximum performance. The most difficult part of reconditioning your tanning bed is taking it apart, and since you already have to do that to replace the lamps, it just makes sense to go ahead and recondition the acrylics. You can buy Novus #2 for this purpose for less than $7, or buy the entire Tanning Bed Rebuild Kit with Novus #1, #2, #3, daily cleaner concentrate and eyewear for less than $30. So even the clearest looking acrylics can be blocking 20%-40% of the UV that the lamp is producing. "They look perfectly clear to me" is often said, but the fact is that an acrylic will develop a film that you can't see, and while it won't block visible light, it does block UV. Recondition your acrylics - This is often overlooked because people think their acrylics don't need it. Once you see the lamps all work perfectly fine, then replace the acrylic. (Use eyewear when doing this) If you twisted the lamp to much, or there is a problem with the lamp, this will allow you to quickly deal with the problem at hand without having to do all the extra work of removing the acrylic again. Once you have installed your new lamps, and BEFORE you re-install the acrylics, test the new lamps by turning the bed on.
It is helpful to have two people when doing this.ĭon't re-install your acrylics yet. Once removed, lift the acrylic slightly and roll out the front. Handle with care, as they can become somewhat brittle with age.
SUNQUEST TANNING BED CLEANER DRIVER
A small flat blade screw driver is often handy.
Instead, remove the colored plastic strips on the both long sides of each acrylic. SunQuest / SunVision acrylic removal - Do not take the ends off your tanning bed to remove these acrylics (common mistake). This will insure we get you the right lamps the first time, and can show you the maximum options for your tanning bed. THEN call us at 1-80 or shop online using one of our guides, the Lamp Wizard, or other online help we have created just for home tanning bed owners.
SUNQUEST TANNING BED CLEANER PRO
Get a pen and paper before you shop - Write down your beds model name/number (ie: SunMaster 24KCT, SunQuest Pro 16SE, etc.) at the very least, and getting the names and numbers written on the lamps can also be handy, particularly for older beds. There is no way to cover every situation, but our goal is to help keep you from making mistakes when replacing the lamps in your home tanning bed. These are basic tips to make changing your lamps easier. Tips for home tanning bed lamp replacement.
0 kommentar(er)
